4 Reasons Why There’s No Oil on Dipstick

A dipstick can be used to check the oil level of your oil tank. You must immediately take action if you find that your Dipstick has very little or no oil after pulling it out. 

Engine oil is essential for car engines as it creates a protective layer between moving parts that keeps them running smoothly. It is vital to maintain your vehicle’s engine in top condition and optimal performance. 

This article will discuss the possible causes of oily dipsticks and the solutions.

What is the Cause of No Oil on Dipsticks? 

Low Oil Level

Many motorists forget to change their oil frequently. Low oil levels can be caused by not adding engine oil at the required intervals. Your engine oil should be changed every 12 months, or at intervals of 7,500 to 10,000 miles. It depends on how you ride and how often you ride. Most car owners change their engine oil every 5k-7000 miles.

Credits: Rymax Lubricants

Because dipstick readings don’t go deep enough into the tank, they aren’t always accurate. They also miss the oil that is at the bottom. Your tank may still have 2 quarts left if your dipstick is dry. Sometimes your oil light may blink Low engine oil can cause your vehicle to run rough.


Check that your oil pan is fully filled. Every day, check your engine oil level and ensure it is at minimum half full. 

Oil Leaks

An oil leak could also explain why the dipstick shows oil. This causes the engine’s oil level to drop. Leakages in your oil supply lines can allow oil to seep into your engine when you add oil. It all depends on how severe and frequent the leaks are. You can also check the intake manifold to identify oil leaks. If you notice a leak, oil in the intake manifoldYou’re able to see what’s wrong.

There are many reasons why oil leaks happen: 

  1. Wear and tear on the valve and crankcase seals can cause leaks. 
  2. You may also find dents or cracks in the supply lines, which could lead to leaks. 


Contact your mechanic immediately to have your vehicle inspected. Only after identifying the source of the leak, can you refill your engine oil. 

Increased Oil Consumption 

Your engine could be using more oil than it used to if there isn’t any oil in the dipstick. Your engine may be consuming more oil than it should. This can lead to a lower oil level.

Reasons for an increase in oil consumption:

  1. Leakage of the head gasket could cause the engine block to come apart and break the seal with the cylinder head. Broken seals in the head gasket This can lead to the combustion of additional engine oil.
  2. If you live in cold weatherYour engine will consume more oil if the engine oil is not heated to the right temperature..


You should choose a low viscosity oil if you live in colder climates. Your engine will need less thickness oil. Also, make sure to repair any engine parts so the oil can be used efficiently. 

Dipstick is incorrect

This is rare, but it does happen. Every car model has a specific dipstick. An incorrect dipstick can lead to oil overflowing or underflowing in your engine.

It could be that you got the wrong dipstick. Your vehicle manufacturer could be responsible. Perhaps your mechanic misplaced your Dipstick.

How to tell if your dipstick has gone wrong

  1. Take a look at the dipsticks on other vehicles with the same model.
  2. The car owner’s guide should be read. It should include information about the dipstick.
  3. You should have your dipstick checked if you notice any incorrect readings, such as a quart high rating or low rating.


If you’re certain you have a defective dipstick, contact your car manufacturer to request a replacement.

What happens if there is low oil on the dipstick? 

A dipstick without oil means that the critical fluid responsible for heating and providing lubrication to the engine components is missing.

Side effects of low oil on the Dipstick

  1. Increased friction between internal components
  2. Wear and tear of internal components 
  3. Lubrication requires more oil.
  4. Low fuel economy, overheatingPower loss, and.

This misconception also applies to transmission issues. Many people wonder if it is possible to fix transmission issues. low oil can hinder transmission. For more information, please click this link

Let’s find out more about dipsticks, and how they can be used to check the oil level.

What is a Dipstick, you ask? 

An oil dipstick, which is similar to an ordinary stick, is used to measure the amount of oil in an engine’s oil tank. This is the most traditional way to check the oil. It’s simple, fast, and easy. It can be tricky. use a dipstickIt is important to read and verify the information in the user manual.

What to do if there is no oil on the dipstick? 

If you’ve checked the oil level using a dipstick but there is no oil, then follow the steps below:

  1. If it is on, immediately turn the engine off.
  2. Let your vehicle cool for a few moments before looking into the source of the oil loss. Try to open the cap on a hot engine It can be very dangerous.
  3. Also, turn off your car’s lighting and air conditioning. This can cause more gasoline consumption and increase oil consumption. 
  4. In the event of internal leakages, make sure you contact your mechanic. 
  5. Before you start driving again, ensure that your oil tank has been fully topped up.


Let’s summarize: If your dipstick appears dry when you check your oil level, it is either a defective dipstick, or your engine oil is very low. Engine oil ensures that your engine runs smoothly. Insufficient oil can cause serious engine damage. If your vehicle isn’t lubricated, it won’t start. 

Keep your oil topped off on a regular schedule and use a dipstick to check your vehicle’s oil levels. You should make sure that all wear and tear on any components is repaired before your oil starts to leak. If you have no oil, refill it or add more.

FAQs on No Oil on Dipstick

[sp_easyaccordion id=”1210″]

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *